|
FIND
THE ADAPTER FOR YOUR RADIO
|
at Each Station
| • |
The
iQfive LCDs show test status and battery capacity,
in mAh, during all test and maintenance modes |
| • |
"Analyze"
mode measures your battery capacity. You compare
the test results to the battery specification to
predict performance and screen weak batteries |
| • |
"Condition"
mode cycles batteries to bring back capacity. The
condition display provides the information you need
to return restored batteries to the field or remove
deficient batteries from your inventory |
| • |
Warehoused
or stored batteries may exhibit voltage depression
and create calls from the field asking, "why
is my new battery not performing?" "Cycle
Test" mode "forms" (charge/discharge)
new batteries |
| • |
"Discharge"
mode tests the battery capacity generated by your
radio charger. You can tell if your charger is delivering
full potential to your battery |
| • |
Start
all tests with the touch of a button. No programming
or complex start-up required |
| • |
Interfaces
directly with the optional Star SP200 series or
compatible dot matrix printers. |
| • |
Maintain
Li-Ion batteries with "Type 3" adapters
(Version 9.35 or later software). These adapters
add the required CCCV charge, expand safety and
increase the charge rate as needed for lithium ion |
| • |
The
iQpac accepts battery adapters for most popular
and contemporary radios |
| • |
Your
satisfaction is guaranteed. Return for a full refund,
within 30 days, if dissatisfied. The iQfive is also
guaranteed against defects for three-years |
|
